Search results
Learn how to design pile caps to transfer loads from superstructure to foundation using truss analogy or bending theories. See a worked example of pile cap supporting two piles and a column.
- Design of Pad Footing
Design Example. Live load 400kN; Dead load 900kN; Allowable...
- Pile Foundations
This shall be considered in the pile cap design. Special...
- Design of Piles
Structural Capacity of Pile = 0.25 fcu Ac Where fcu =...
- Design Combined Footing
Design Load = (1.35*800+1.5*200) + 1.35*500+1.5*100) ......
- Design of Strip Footings
Looking For Design of Strip Footings? Pad footings, combined...
- Concrete Foundation What is It
The article further discusses the pile foundation design,...
- Eccentrically Loaded Foundations
The design of eccentrically loaded foundations is not the...
- Settlement of Shallow Foundations
In the pile design also a certain amount of settlement could...
- Design of Pad Footing
Learn how to design a pile cap with 12 in. diameter piles and a service load capacity of 50 tons each using ACI 318-14 code and spMats software. Compare the design results with hand solution and finite element analysis.
Learn how to design a pile cap foundation for a concrete column subjected to an axial load, using C30/37 concrete and 500 N/mm² steel. The video covers the steps of determining the required reinforcement, node stress check, shear check, and more.
Geometry of the Pile-Cap. Try an overall depth, h=1000mm, effective depth =900mm. Spacing between pile = 3×400 = 1200mm. Overhangs from edge of piles = 150mm. Length of pile = 1200+400/2+400/2+150+150 =1900mm. Width of pile cap = 400+150+150 = 700mm.
17 lut 2020 · Learn how to design a pile cap for a 5-storey building based on the soil investigation report and the column loads. See the layout, dimensions, reinforcement and shear check of the pile cap according to BS 8110-1:1997.
20 lip 2018 · Learn how to design a pile cap, a type of foundation that transmits load into hard strata via piles. Find out the recommended shape, dimensions, thickness, details and design approach for pile cap.
1 Introduction. In this tutorial it is explained how to use Nonlinear Finite Element Analysis (NLFEA) to determine the reinforcement design for a pile cap which complies with the Eurocode 2 (EC2)1 and the fib Model Code 2010 (fib2010)2. Eurocode 2 (NEN-EN 1992-1-1, 5.7) allows NLFEA:
