Search results
Guardrail systems. The employer must ensure guardrail systems meet the following requirements: 1910.29 (b) (1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
Guardrail systems. Guardrail systems and their use shall comply with the following provisions: 1926.502 (b) (1) Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.
Where workers on a construction site are exposed to vertical drops of 6 feet or more, OSHA requires that employers provide fall protection in one of three ways before work begins: Placing guardrails around the hazard area. Deploying safety nets. Providing personal fall arrest systems for each employee.
(b) Guardrail systems. The employer must ensure guardrail systems meet the following requirements: ( 1 ) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
The employer must ensure: (i) Each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.
11 kwi 2024 · Guardrail Systems: Regulations for proper guardrail systems are provided in OSHA 1926.502(b). These systems consist of top rails, mid rails, and toe boards installed along the open sides and edges of elevated work platforms to create a physical barrier that prevents workers from falling.
(i) Guardrail systems shall be installed along all open sides and ends of platforms. Guardrail systems shall be installed before the scaffold is released for use by employees other than erection/dismantling crews.
