Search results
The criteria and practices requirements for guardrail systems on scaffolds are contained in 29 CFR part 1926, subpart L. Figure D-11 -- Guard Rail Systems. Depicts two figures showing two types of Guard Rail Systems. The first shows the walking-working surface, posts, and mid rail for guard system.
Guardrail systems. Guardrail systems and their use shall comply with the following provisions: 1926.502 (b) (1) Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.
The standard requires guardrail systems and components to be designed and built to meet the requirements of § 1926.502 (b) (3), (4), and (5). This appendix serves as a non-mandatory guideline to assist employers in complying with these requirements.
11 kwi 2024 · Strength Requirements: Guardrail systems must withstand a force of at least 200 pounds (890 N) applied within 2 inches of the top edge in any outward or downward direction, as well as a force of at least 150 pounds (666 N) applied to midrails or other members.
The employer must ensure: (i) Each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.
The employer must ensure guardrail systems meet the following requirements: (1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
19 wrz 2024 · Here’s a brief overview of these requirements: Height Requirements: The height of any railing must be between 42 and 45 inches. Load Capacity: The guardrail must be strong enough to withstand a force of at least 200 pounds from both directions.
