Search results
Find the default login, username, password, and ip address for your LINKSYS WAP54G router. You will need to know then when you get a new router, or when you reset your router.
Change the default wireless network name or SSID Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be up to 32 characters in length. Linksys wireless products use linksys as the default wireless network name. You
This user guide covers the steps for setting up and using the Wireless-G Access Point. Chapter 1: Introduction This chapter describes the Access Point’s applications and this User Guide. Chapter 2: Planning your Wireless Network This chapter describes the basics of wireless networking.
Wireless-G Access Point Select Static IP if you want to assign a static or fixed IP address to the Access Point. Then complete the following: IP Address. The IP address must be unique to your network. We suggest you use the default IP address of 192.168.1.245. Page 47: The Setup - Ap Mode Tab AP (Access Point) Client.
Enter an IP Address, Sub-net Mask, and the IP Address of your network Gateway. Then, click the Next button. IP Address . This IP address must be unique to your network. (The default IP address is 192.168.1.245.) Subnet Mask. The Access Point's Subnet Mask must be the same as your Ethernet net-work. Gateway. This IP address should be the IP ...
Linksys wireless products • Password protect all computers on the network and use linksys as the default wireless network name. You individually password protect sensitive files. should change the wireless network name to something Change passwords on a regular basis.
Aby skonfigurować router Linksys WAP54G, podłącz go do modemu za pomocą kabla Ethernet, włącz zasilanie i otwórz przeglądarkę internetową, aby uzyskać dostęp do strony konfiguracyjnej routera pod domyślnym adresem IP (zwykle 192.168.1.1).
