Search results
9 gru 2009 · When the topic is drum brakes, there seems to be a lack of a consensus as to where the larger shoe should be positioned. Here is my view: The larger shoe should go forward, not rearward. Remember: Bolted together as one cohesive part, are the rear-wheel, brake-drum and axle-shaft.
It's crucial to place the brake shoes facing the right direction. Reversing the primary and secondary shoes results in noise, brake drag, and a pull in the steering. If unsure, leave the opposite side intact as a reference when replacing brake shoes and hardware.
Sign up for the Raybestos Brake STOP to access premium training videos from Raybestos: https://bit.ly/2TBs1hxDisc brakes have become a standard for many mode...
In drum brakes, the brake shoe is the curved metal backing plate covered with friction material that rubs the drum to provide braking. A small hydraulic cylinder presses the two shoes apart, and into the drum, and a screw adjuster at the bottom gradually extends to make up for worn shoes.
How To Replace Drum Brake Shoes (Full) - EricTheCarGuy http://www.ericthecarguy.com/ Here is a full length version of a video that I posted some time ago, this way you can watch the entire...
The brake shoes shown in Figure 1 are forced apart and into contact with the drum by the small hydraulic cylinder, or expander, shown on the right. They pivot about the shoe abutment on the left and are restored to the 'brakes off' position by the shoe return springs.
Brake shoes, found in drum brakes, are crescent-shaped with friction material on the outside. When you press the brake pedal, the shoes push outwards against the drums to slow your car down. Conversely, brake pads are flat, rectangular, and used in disc brakes.
