Search results
Cobenium snap ring catalog number R0G26 and 4002 Cres stud assemblies are available for use with 4002 - OS and 4002 - OS-1 grommet. All edges broken .005 max and all Fins & Burrs removed except where otherwise noted. Unless otherwise specified dimensions are in inches & per ANSI Y14.5M.
- Camloc® 1/4 Turn Fasteners, 4002 Series
Stud Assemblies, Camloc 1/4 Turn Fasteners.
- 4002-P3 Grommets, Plus Flush Standard
Browse 4002-P3 Grommets, Plus Flush Standard in the Howmet...
- Camloc® 1/4 Turn Fasteners, 4002 Series
Stud Assemblies, Camloc 1/4 Turn Fasteners.
Browse 4002-P3 Grommets, Plus Flush Standard in the Howmet Aerospace catalog including Item #,Grommet Material,Skirt Material,Finish,L,Panel Thickness,Approx. Weight/100.
A flush grommet requires the material be slightly dimpled, or countersunk, so the top of the grommet sits flush with the material. Plus flush does not require a dimple, or countersink, and sits on the material and is slightly rounded.
To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. After determining the total grip thickness, use the grommet column under which the selected grommet and receptacle appear.
Small fastener for high tensile load. Large range of stud assemblies with fixed and floating receptacles. Selection Instructions. 1. Select stud assembly, page G-4 and G-5, grommet and snap-on retaining ring, page G-7 and receptacle, page G-8 and G-9. 2. Select retaining washer, page G-6, for studs from length no. 5. 3.
The 4002 series fasteners are considerably stronger than the 2600 and 2700 series. Shear and tensile strength: 1050 lbs. (ultimate), 700 lbs. (rated). All studs and grommets listed are made of steel.
