Search results
Designed to race in the SCCA Trans Am Series, the 1970 rules changes allowing for the 5.7L engine meant the Camaro was able to now use the 350 engine. The previous Z28's were limited to 302 cubic inches and were known to be tempermental on the street.
1970 Chevrolet Camaro rear. Most of the engine and drivetrain components were carried over from 1969, with the exception of the 230 cu in (3.8 L) six-cylinder – replaced by the 250 cu in (4.1 L) six, rated at 155 hp (116 kW) – and the 302 cu in (5 L) used exclusively in the first-generation Z/28.
Q: What engines did the 1970 Chevrolet Camaro have? A: The 1970 Chevrolet Camaro had the following engine options: Inline 6 (4097 cc | 250.0 cu in. | 4.1 L.) with 155 BHP (114.08 KW) @ 4200 RPM and 235 Ft-Lbs (319 NM) @ 1600 RPM
19 maj 2015 · Camaro output peaked in 1970, with 375 hp and 415 lb-ft (big-block SS Camaro), but by 1975 the most powerful V8 model offered only 155 hp. The Camaro wouldn’t see more than 200 horsepower again until the mid-1980s. Sadly, this marked the last year for 9-plus compression ratio engines.
The base engine was a 155 horsepower six cylinder engine, and the base model also had the option of a 307 CID V8 that produced 200 horsepower. There were also six other V8 options, depending on which of the four models was chosen.
21 cze 2024 · The Z28 350 CID V-8 is new for the Camaro and Corvette. it was rated at 360 HP at 6000 RPM and 380 ft. lbs. of torque at 4000 RPM in the Camaro. The engine had sufficient torque for the Turbo Hydramatic transmission could now be an option.
17 paź 2011 · In 1970, there were several engine choices, including an inline six-cylinder, four different small-block V8's, and 2 big-block V8's. Although the big-blocks were called 396's, in reality they actually displaced 402ci.
