Search results
19 paź 2016 · Installation Manual. Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an compatible transceivers. This will allow computer control of TX (PTT, KEY, FSK), and the audio In/Out interface (except the FT-891). The COM port is also used for updating the transceiver firmware.
11 lis 2018 · Ensure the USB cable is unplugged and right click on the radio device and uninstall the device. Once the device uninstall is complete, reinsert the radio USB cable and Windows should find the Yaesu driver and use it.
I've tried installing the drivers from the Yaesu site as well as the latest Silicon Labs drivers and still cannot get the dual com ports to be recognized when the USB cable is plugged in and the radio is turned on.
How To Get Your Yaesu HF Rig Talking To Your PC Via USB For Digital Modes - I cover the drivers, menu settings and testing of your FTdx3000 or your FT-991(a)...
Using the Yaesu USB connection: 1) Download and install the SCU-17 USB driver (Virtual COM port driver) from the Yaesu website for your radio. Be sure to follow the directions for installation of the drivers. Do not connect a cable to your radio until the drivers are installed and you have rebooted your computer. (not always mentioned!). Do NOT
26 lis 2018 · Yaesu radios have an additional USB UART Bridge accessible through the hub. You will see an Enhanced port for CAT and a Standard port for PTT in Device Manager. Each has a unique COM port number.
USB Capable The FT-991 can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an integrated SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, Shift).
