Search results
Download and unzip the “wx1xxxen.zip” file of the WIRES-X software. Execute “Install.exe” file in the unzipped folder. The “WIRES-X Installer” window will appear. Click [WIRES-X Software Setup]. The “Welcome to the WIRES-X Setup Wizard” window will appear. Click [Next]. The “License” window will appear.
17 sty 2023 · He never mentioned setting up the Windows audio levels and that is probably the single most important & difficult thing to get right, at least with my FT-897. I haven’t tried DR on my FT-817 but it’s next.
19 paź 2016 · Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an compatible transceivers. This will allow computer control of TX (PTT, KEY, FSK),
This document suggests how Windows 10 should be set up to operate unattended. I.e., 24x7x365. There are many “features” in Windows that assume an operator is sitting in front of the monitor. Many of these features can cause you to lose control of the computer. The Windows key reference in this document...is the or on the keyboard.
1 cze 2017 · The Ultimate Control Software for your Yaesu FTDX and FT-991 / A Radios. Win4Yaesu Suite works with the FTDX-1200, 3000, 5000, 9000, 101M/MP, FTDX10 and FT-991 / A Radios.
I am a new owner of a Yaesu FT-710 replacing a Icom IC-761. Trying to change fldigi, winlink (all HF modes) and wsjtx on Win10 that I used with the Icom for many years. Downloaded and installed USB drivers from Yaesu site for USB B cable.
Remote operation of the transceiver is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by ...
