Yahoo Poland Wyszukiwanie w Internecie

Search results

1. www.yaesu.com › downloadFileVirtual COM Port Driver Installation Program - Yaesu

   www.yaesu.com › downloadFile

   19 paź 2016 · Installing the virtual COM port driver software on a computer makes possible CAT communication via a USB cable to the SCU-17 or an compatible transceivers. This will allow computer control of TX (PTT, KEY, FSK),

2. morsetutor.com › 2018 › 11Yaesu USB Driver Update - morsetutor.com

   morsetutor.com › 2018 › 11

   • Zapisane w pamięci cache

   11 lis 2018 · I am running Windows 10 Pro 64 Bit and am able to run the latest version of PCC downloaded from the Yaesu website without any special settings. Ham Radio Deluxe also works just fine with the updated driver.

3. www.silabs.com › developer-tools › usb-to-uart-bridge-vcp-driversCP210x USB to UART Bridge VCP Drivers - Silicon Labs

   www.silabs.com › developer-tools › usb-to-uart-bridge-vcp-drivers

   • Zapisane w pamięci cache

   The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.

4. support.hamradiodeluxe.com › support › solutionsFTDX-1200 Setup With SCU-17 - Ham Radio Deluxe Customer Support

   support.hamradiodeluxe.com › support › solutions

   • Zapisane w pamięci cache

   17 maj 2022 · For a 64 Bit Windows systems use CP210xVCPInstaller_x64.exe. Get Connected. Once the SCU-17 drivers are installed, connect a “straight through” serial cable from the DB-9 connection on the SCU-17 to the DB-9 CAT connection on the FTDX-1200 (Red Arrow).

5. www.realtek.com › Download › ListRealtek

   www.realtek.com › Download › List

   © 2024 Realtek Semiconductor Corp. All rights reserved

6. www.n1fd.org › 2018/11/26 › wsjt-x-setupSetting up CAT/CI-V and Audio Drivers for WSJT-X - Nashua Area...

   www.n1fd.org › 2018/11/26 › wsjt-x-setup

   • Zapisane w pamięci cache

   26 lis 2018 · Yaesu radios have an additional USB UART Bridge accessible through the hub. You will see an Enhanced port for CAT and a Standard port for PTT in Device Manager. Each has a unique COM port number.

7. yaesu.va2fsq.com › wp-content › uploadsWin4Yaesu Suite Documentation V1 - Win4YaesuSuite for the FTDX...

   yaesu.va2fsq.com › wp-content › uploads

   Using the Yaesu USB connection: 1) Download and install the SCU-17 USB driver (Virtual COM port driver) from the Yaesu website for your radio. Be sure to follow the directions for installation of the drivers. Do not connect a cable to your radio until the drivers are installed and you have rebooted your computer. (not always mentioned!). Do NOT