Search results
19 paź 2016 · The latest version of the virtual COM port driver can be downloaded from the Silicon Labs, Inc. website (http:// www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx). Click “VCP Driver Kit” on the above website.
Tuning steps: 5 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz. Frequency stability: ±10 ppm @ -20 to +60°C (-4 to +140°F) Mode: FM / NFM. Channels / memory management: 200 regular with alpha tags (6 characters) 8 banks.
Updated by Richard Cochran over 9 years ago. Update: Dennis has e-mailed me the information from his debug.log, showing what his radio is returning as its header. His is a European version of the FT-1900. The radio returns: [2015-04-07 12:29:52,792] chirp.drivers.ft2900 - DEBUG: Header:
FT-1900 Radio Programming Software. The ADMS-1900 software helps you program memory channel and menu setting details of the Yaesu FT-1900 radio. So many options in one box! The programmer lays them all out on the computer screen for your to customize for your activities.
25 sie 2010 · You can import frequencies from other sources, change the programming in a few minutes if you're going to a different area, and not have to worry about which menu buried four deep does what. You can get a really good programming package at FTB1900 Programming for $15 and a USB cable will run about another $20.
FT-1900R OPERATING MANUAL 1 The Yaesu FT-1900R is a deluxe, rugged FM mobile transceiver providing high power output and outstanding receiver performance for the 144 MHz Amateur band. Included in the FT-1900R’s feature complement are: 55 Watts of power output, with selection of four power levels for every operating situ-ation.
14 kwi 2002 · In my experience with my ft-2900r (same process) just melting the solder is usually enough to get it to stop bridging between the 2 halves. Worst case is that you'll have to get some desoldering braid (cheaply obtained from radio shack) and use it to remove some of the solder on the pad which will remove the bridge.
