Search results
Y-Axis Travel Limits. Each Haas Y-Axis lathe has +/- 2.00” of travel. There is a narrow corner of the work envelope, where a positive Y-Axis movement is constrained, as the X-Axis reaches its physical limit. This area is marked as “B” in the diagram to the right.
12 sie 2012 · Loosen the Y axis blocks under the saddle that runs on the Y axis guides. This will allow you to adjust the X axis so it is square with the Y axis. That machine looks like it should have 4 blocks to loosen.
1. Set the machine height: Move the X and Y axes to the home position. Loosen the middle leveling screws [2 and 5] so that they are not supporting any weight. Set the machine on 4 corner leveling screws 3" (76.2 mm) above the floor. 2. Rough level the machine: Turn the leveling screw #4 up.
4 paź 2019 · This procedure assumes that you have went through the steps before spindle centerline in the ST, DS - Field Service Lathe Level and Alignment Checklist. If not, do this now to ensure that you do not induce errors from other components that could be out of alignment.
Rigid, high-performance Y-Axis CNC Lathe with a wide selection of available options for every workshop. The ST-40Y adds Y-axis motion to our shop-proven ST-40 to create a large-frame turning centre with a generous work envelope and secondary milling capabilities.
The addition of Y-axis and live tooling allows milling, drilling, and tapping for increased machine capabilities. Haas Y-axis lathes combine Y-axis, full C-axis motion, and high-performance live tooling to create versatile done-in-one machining solutions for any shop.
AVAILABLE Y-AXIS MODELS: The Haas ST Series Y-axis turning centers provide 4" (102 mm) of Y-axis travel (±2" [±51 mm] from the centerline) for off-center milling, drilling, and tapping, and come equipped with 4000-rpm live tooling, and a synchronized C axis for versatile 4-axis capability. A 6000-rpm upgrade is available for the live tooling.
