Search results
You’ll need to know the following information to set up your printer on your wireless network: Network name (SSID) - This is the name of the wireless network that is set up on your router or access point. WEP key or WPA passphrase - If security is enabled, this is the network security password.
To add the printer to your wireless network, you need to know the name (SSID) of your wireless network. If it has security enabled, you also need to know the security mode and WEP key or WPA passphrase. Enter your network and security information in the space provided below: Network name (SSID): ____________________________________________
In the Infrastructure mode, both wireless and wired computers can communicate through an access point (such as wireless router) to send data to the network interface. Before connecting the printer to a wireless network, you need the following information. The network name or SSID.
If access restrictions are set on the access point (or wireless router), register the printer’s Media Access Control (MAC) address or IP address to the access point. Check the MAC address on the printer’s control panel or network status sheet.
Wireless Network Installation. To connect your printer wirelessly, you need to know the name (SSID) of your wireless network. If your network has security enabled, you also need to know the WEP key or WPA passphrase. Write down this information below: Network name (SSID): _________________________________________. .
You can manually configure wireless settings to connect your printer to an access point (infrastructure) network or computer-to-computer (ad-hoc) network. Connecting to Access Point Network
Top. Connect the printer to a wireless network. This section describes how to set up wireless security and connect to the access point. The printer supports the following methods to make wireless settings. Manual setup using the control panel. Automatic setup using Wi-Fi Protected Setup (WPS)
