Search results
Use the encapsulation dot1q command in interface range mode to apply a VLAN ID to each subinterface within the range specified by the interface range command. The VLAN ID specified by the vlan-id argument is applied to the first subinterface in the range. Each subsequent interface is
30 cze 2024 · Understanding the VLAN ID Ranges. VLAN IDs are essential for identifying and managing different VLANs within a network. The IEEE 802.1Q standard defines the use of VLAN IDs on Ethernet networks, where each VLAN is given a unique ID between 1 and 4094.
Enters configuration mode. Step 2: vlan {vlan-id | vlan-range} Example: switch(config)# vlan 5 switch(config-vlan)# Places you into the VLAN configuration submode. This submode allows you to name, set the state, disable, and shut down the VLAN or range of VLANs. You cannot change any of these values for VLAN1 or the internally allocated VLANs ...
13 paź 2024 · Access the first switch's CLI prompt. Enter global configuration mode and use the vlan command to create a new VLAN. This command needs a VLAN number as an argument. It checks the specified VLAN number for an existing VLAN before creating a new VLAN. If it finds an existing VLAN having the specified number, it does not create a new VLAN.
22 cze 2009 · Description: VLANs are created by number. The two ranges of VLANs are as follows: 1) The standard range consists of VLANs 1 to 1000. 2) The extended range consists of VLANs 1025 to 4096.
Normal range VLANs are usually the ones utilized in switched networks, because most networks do not need over 1000 VLANs! Used in small- and medium-sized business and enterprise networks. Identified by a VLAN ID between 1 and 1005. IDs 1002 through 1005 are reserved for Token Ring and FDDI VLANs.
If you want for example to separate the different departments of your enterprise into different IP subnetworks, then each department should belong to its own Layer 2 VLAN. For example, let’s assume the following scenario: Accounting Department: IP Subnet 192.168.2.0/24 –> VLAN 2. Management Department: IP Subnet 192.168.3.0/24 –> VLAN 3.
