Search results
ISO 10816-6 specifies the general conditions and procedures for the measurement and evaluation of vibration, using measurements made on the non-rotating and non-reciprocating parts of reciprocating machines. It generally applies to reciprocating piston machines mounted either rigidly or resiliently with power ratings of above 100 kW.
4 lut 2021 · The ISO 10816-3 standard provides criteria for evaluating the vibration of machinery according to measurements taken on non-rotating parts, such as bearings, bearing pedestals, or housings.
This part of ISO 10816 gives criteria for assessing vibration levels when measurements are made in situ. The criteria specified apply to machine sets having a power above 15 kW and operating speeds between 120 r/min and 15 000 r/min.
Introduction. This document provides specific guidance for assessing. a) the severity of vibration measured on bearings, bearing pedestals, or housings of industrial machines when measurements are made in-situ, and. b) the severity of radial shaft vibration on coupled industrial machines.
ISO 20816-1 is the part of the ISO 20816 series that gives the general requirements for evaluating the vibration of various machine types when the vibration measurements are made on both non-rotating parts and rotating shafts. ISO 20816-9 (this document) provides specific provisions for assessing the vibration of individually
9 cze 2022 · Accurex™ performs a first order diagnostic based on ISO 10816-3 specifications (based on overall vibration levels in velocity, in inches per second/peak, or mm/sec/rms), and a second order diagnostic based on several thousand rules-based algorithms.
5 lis 2021 · ISO 10816-3 is a modern updated chart to determine the health of a machine. It bases levels of overall vibration amplitude (in velocity) to determine the operating condition of the machine.
