Search results
The fuel system is important when it comes to getting your engine fired quickly. A typical fuel system includes: a tank, a fuel line that connects the tank to the carburetor, a pressure line that feeds exhaust pressure into the tank for consistent fuel delivery and, possibly, a fuel filter. • Fuel tank.
Here's a general step-by-step guide to help you tune a nitro RC car engine: Note: The specific instructions might vary depending on the engine and nitro fuel you're using, so always refer to your engine's manual for manufacturer-specific recommendations.
13 maj 2009 · Some engine experts recommend that, during break-in, the engine be set rich enough so that it will actually four-cycle instead of two (our nitro engines are two-cycle, which means that the fuel/air mixture is ignited once for every two strokes of the piston).
5 kwi 2024 · Settle in for this one - it's over an hour, and has great production value (and is hilarious!) But if you want to know how a carb works, how the needle valves work, how to adjust your idle, or anything else involved with nitro tuning, you must check this out.
21 sie 2019 · Fill your tanks with very rich fuel three consecutive times. At a third of each run, close the high-speed needle and then run your RC car for two more tanks. Make sure you empty at least six tanks of fuel. To properly break in the engine, it’s recommended that you use Nitrotane 20% or 30% race fuel.
17 kwi 2023 · After adjusting the high- and low-speed needles, it’s time to fine-tune the nitro RC car engine’s air/fuel mixture. The ideal mixture will ensure smooth acceleration, consistent engine performance, and a safe operating temperature.
10 mar 2007 · Tuning a nitro/methane 2 stroke engine literally means adjusting the air/fuel mixture inside the chamber. This is done by means of adjusting the amount of fuel that is allowed to flow into the carburetor via needles which can be opened and closed.
