Search results
Motor home entrance doors with thickness of 1.500" (38.1mm), 1.614" (41mm) or 1.812" (46mm) Fifth-wheel trailers and motor homes. Applications requiring resistance to water and dirt infiltration.
TriMark Model 030-0900 RV Entry Door Lock. This lock has many variations. They all look the same installed, but depending on how thick the door is and how far away from the edge of the door the lock sits - the deadbolt and the inner mechanisms change. The lock needs to be removed to look for a part number. The number is located on the back side ...
If you cannot lock your door using the bottom cam lock and the inside "up-down" locking pin, then you probably just need to adjust the nut behind the 3/4x3/4 inch cover plate on the end of the door. This should do the trick.
30-900 Motor Home Entrance Door Hardware With Dead Bolt DESIGNED FOR: • Motor home entrance doors with thickness of 1-1/2” or 1-7/8" • Fifth-wheel trailers and motor homes • Applications requiring resistance to water and dirt infiltration • Door seal pressures of 25 lbs. or less for ease of function and maximum life (not to exceed 50 ...
FEATURES/BENEFITS: Automotive style latch mechanism. Smooth opening/closing action. Paddle can be locked before door is shut. Paddle is rigid when locked. Comfortable finger access. New inside handle design facilitates ergonomic function and modern styling. Adaptable for power door lock actuator.
This exterior lock will only works if the 5 digit code that is stamped on the actuator on the inside of the interior handle is 11928 , 21397 or 13428. Exterior door handle measures 7.6' Tall by 5.4' Wide Recommended cutout 6.88" x 4.56".
Designed for motor home entrance doors, this product provides easy installation with a through sandwich mounting. It features a large exterior paddle and an ergonomic "L" inside release and is adaptable for power locking.
