Search results
Varnish can be thinned by adding an amount of solvent to the varnish to reduce its viscosity and improve the brushing ability and flow quality. Be sure to use the solvent specified by the manufacturer.
For desired flow and a longer wet-edge time during application (first coat or subsequent coats), you can thin TotalBoat Halcyon marine varnish with clean, fresh water - up to 20%, maximum - but it's not required. Never use any solvent or liquid other than water to thin Halcyon varnish, if needed.
Fast-evaporating reducing solvent used to thin most TotalBoat one-part paints, primers, and varnishes to improve flow for spray application. Below 60°F, it c...
Halcyon will need to be thinned 5-20% with clean, fresh (or distilled) water. The amount of water needed to spray will vary, but keep in mind that the more that Halcyon is thinned, the lower the gloss will be when it has cured.
Fast-evaporating reducing solvent used to thin most TotalBoat one-part paints, primers, and varnishes to improve flow for spray application. Below 60°F, it can be used as a thinner for brushing and rolling applications.
TotalBoat thinners for brushing and spraying marine paint, varnish, and primers. Use these solvents to clean surfaces first, and paint equipment after you're done. Reducing solvents improve paint flow and help extend working time in warm conditions.
20 mar 2024 · Thinning: Brushing - Typically, you don't need to thin varnish after the first coat, but for desired flow, you may need to thin 5-10% with TotalBoat Special Brushing Thinner 100 in warmer conditions over 75°F.
