Search results
Catalog Numbering System By referencing this easy-to-use guide, you can identify the correct product to meet your needs. The 7th and 8th position shall be a significant two-digit number that indicates the holder cross section. For shanks 5/8" square and over, the number will represent the number of sixteenths of width and height.
Tenon plates are secured to wall with a 1/4" bolt (by others) through an elongated slot that provides 1" [25] vertical range and 3/16" [5] horizontal range for fitting adjustment. Flanges are then fitted over Tenon plates and secured by tightening
For internal turning with steel dampened boring bars, the first choice is bars of type 570-3C. For grooving and rough threading operations where the radial forces are higher than in turning, the recommended bar type is 570-4C.
For a crisp appearance, shoulder the tenons slightly . For corrected scale reading, use this formula: Tenon Board Thickness + Mortise Height ÷ 2 = Tenon Scale Setting. Example: (3⁄4"[20mm] + 5⁄8"[16mm]) ÷ 2 = 11⁄16"[18mm] Set 1⁄2"[12,7mm] J tenon scale on 11⁄16"[18mm] or on your actual calculated setting. 9-5.
Kennametal tool holders include shank systems, tapers, clamps, collets and sleeves. If you need assistance choosing the right holders or accessories, we can help you improve your machining output and accuracy.
Turning Holder Nomenclature – ANSI. MAN-043-1 2935964 06/2024 • Printed in the USA • ingersoll-imc.com. 4. Insert Clearance Angle
Home>Concealed Flange Mount - Tenon Plate. Our Price:$2.23. Product Code:D-1512-98. Qty: Description. Tenon Plate For Mounting Concealed Grab Bars. Links.
