Search results
12 lut 2023 · Look across the accessory drive belt to find the tensioner. The pulley is with the tensioner and it contains a smooth surface toward the belt’s top. Where the belt rides, there will be no grooves. If you can’t seem to find the tensioner pulley, go ahead and reference your vehicle’s service manual.
We suggest technicians change a pulley whenever a timing belt or serpentine belt is changed and vice versa, but there are eight key warning signs to look out for when a pulley goes bad: Rock – Rock the pulley back and forth.
13 lip 2021 · 6 Tensioner Warning Signs 1. Tensioner Noise 2. Improper Belt Tracking 3. Loss of Tension 4. Sticking or Notchy Movement 5. Metal-to-Metal Contact 6. Broken or Cracked Tensioner “Stops”
30 maj 2015 · I just replaced my A/C belt in my Getz and noticed that the pully wasn't spinning. I immediately turned the car off and pulled the pulley assembly out to see what was happening. Not sure if I've incorrectly assembled the pulley or if I'm missing a piece however seems like the larger metal plate is rubbing against the rubber coating on the pulley.
30 sty 2011 · One of the pulleys on my v6 was making a horrible noise on cold days. So I decided to change out both the tensioner pulley, idler pulley (kinda impossible to tell which one is squealing since they are so close), and serpentine belt while I was at it.
30 sty 2014 · Replacing the tensioner went fairly smoothly. Here's what seems an easy way to do it. I'm assuming you start with a new tensioner assembly which comes pinned in the folded position, i.e., with the wheel that actually puts the tension on the belt up and away from the extended position it normally would be in.
1 sty 2007 · In order to replace the pulleys, you need to remove the serpentine belt first. Taurus has a tensioner pulley that automatically adjust itself to maintain proper level of tension and you need to rotate the tensioner bolt in order to loosen the tension manually.
