Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. 3 sie 2010 · The Rockshaft Control Valve has stuck as the result of corrosion on the spool inside the valve. To prevent the Rockshaft Control Valve from sticking, apply TY25744 grease into the Discharge Valve per the following procedures. Remove the Rockshaft Control Valve from the Rockshaft.

  2. 26 kwi 2011 · The 3 pt hitch and all hoses are dry and intact. Just the darn thing stuck at the top. Raising and lowering lift position control lever and draft control lever won't do anything, engine on or off.

  3. 13 lut 2021 · If the three-point seeps down, then you probably have a bad lift pistonoring. When you closed the lock out valve, you have eliminated the valve and everything else in the system. If the three-point stays up, then you likely have a problem with the three-point control valve.

  4. 7 wrz 2016 · I have a problem with my 3-point hitch where it raises automatically and has no control. Overnight it will drop back down; but, when started, it will automatically raise. I can start the tractor with the hydraulic bypass up and it will also stay down; but, once hydraulics are engaged, it rises.

  5. 4 lut 2020 · All of a sudden it is stuck in the up position. I tried turning the knob ( speed pressure valve?) below the seat and it will not budge in either direction. I am not 100% on the names so will post a couple pics below.

  6. 13 paź 2022 · It’s been working for a few hours and now stopped with the hitch (and mower deck) stuck down. I’m thinking it may be operator error. It is not the down speed control valve….

  7. 1 wrz 2022 · Unfortunately, some John Deere users have complained that the 3-point hitch on their tractors does not work properly. This article will explain how to fix a problem with a John Deere 3-point hitch, including tips and techniques to prevent further damage to your machine.

  1. Ludzie szukają również