Search results
• When the heater turned over, the heater will shut off and the screen will be clear up immediately due to the tip-over function. • After the Heater has cooled down, follow the operation instructions
1 mar 2022 · If the Soleil Ceramic Heater Not Working, it may be because of a faulty power supply, malfunction of fan functions, bad heating elements, tripped circuit breaker. Also, overloaded thermal, lack of airflow and the defective thermostat also stop the normal working of the heater.
When a space heater keeps shutting off, you often don’t know what to do. However, troubleshooting the issue is not too hard. You can find out the reason for the repeated shutoffs even if you are an electronics layman.
Set the level of heat by turning the thermostat dial gradually clockwise for the lowest heat and fully clockwise for maximum. The thermostat will turn the machine off when the selected room heating is achieved, and when the temperature drops it will turn on again automatically.
To reset the heater, follow the next steps: ·Turn the control setting to the ‘O’ position. ·Unplug the heater and wait 5-10minutes for the unit to cool down. ·After the unit has cooled, plug it in and operate normally.
Usually, the source of the E1 error code is overheating due to dust accumulation, a faulty temperature sensor, or a faulty thermal cutoff switch. All of these issues are fixable. If, after fixing the source of the issue, the E1 error persists, try to reset your heater.
AUTO SATETY SHUT OFF. The heater has a built-in safety device, which will switch the heater OFF in case of accidental overheating. To reset the heater, follow the next steps: Turn the control setting to the ‘O’ position. Unplug the heater and wait 5-10minutes for the unit to cool down.
