Search results
Herbicides containing the chemical 2,4-D kill weeds without killing your lawn, but you have to get the mixture right for an effective and non-harmful treatment. Before mixing, keep in mind...
4 maj 2023 · What is the 2,4-D Mix Ratio? The recommended mixing ratio for 2,4-D is 2.5 oz of herbicide to 1 gallon of water. Add five tablespoons of 2,4-D into a gallon of water and mix well before spraying onto broadleaf weeds to kill them.
The mixing ratio and application rate for 2,4-Dichlorophenoxyacetic acid (2,4-D) will vary depending on the brand of herbicide you use and the concentration of the active ingredient in the product. However, here is a general guide for mixing amine 2,4-D: Mix 2.5 oz of 2,4-D weed killer (5 tablespoons) with 1 gallon of water.
17 paź 2010 · Use 1 gallon of water mixed with 2 tablespoons of 2,4-D weed killer to cover 1,000 square feet of lawn or grass. Mix 4 tablespoons in 2 gallons of water to cover 2,000 square feet and 6 tablespoons in 3 gallons of water for 3,000 square feet of lawn.
2,4-D Amine 480 SL selective weedkiller must be diluted with water and applied as an evenly distributed fine spray. The exact amount of water to be used will be obtained when not less than 200 l of the mixture per ha is used. Always calibrate the spraying equipment before use in order to ascertain the exact quantity of spray delivered per ha.
DIRECTIONS FOR USE MIXING. Partly fill the spray tank with water. Add the required amount of AGPRO 2,4-D Amine 720 into the partly filled tank and add the remainder of the water while agitating. Agitate thoroughly before and during spraying and before spraying after a stoppage.
The recommended mixing ratio for 2,4-D amine herbicide is typically 1 to 2 fluid ounces per gallon of water. However, it is important to refer to the specific product label for precise instructions.
