Search results
When a lock is reset, the Master Combination is reverted to the default (1-2-3-4-5-6-7-8) and all Managers/Users are deleted. All System and lock settings will be reset to their defaults. All locks will be uninstalled and unpaired to any Keypad. dormakaba USA Inc. System User Guide 7040.0321 | 27...
- Dormakaba LA GARD 700 Series System User's Manual
To retrieve Audits from a safe lock to the LA GARD Software...
- Dormakaba LA GARD 700 Series System User's Manual
To retrieve Audits from a safe lock to the LA GARD Software client, refer to Section 5.4 “Retrieve Audits” later in this document. Further details concerning Audits can be found in section 3.17 “Time/Date Rules in LA GARD 700 Series Locks”. dormakaba USA Inc. System User Guide 7040.0821 | 35... Page 37: Wrong Try Penalty
If locks are already paired to one system, they can be reset, utilizing the LA GARD 700 Series Reset Box (704065) or the lock can be Uninstalled (#23) from the old keypad and installed to the new keypad.
Attempt to enter the code again. If the code is a user code, it may have been deleted or disabled. The manager code can be used to install or re-enable the code. If the Manager code is unknown, attempt opening with another code. The lock may need to be reset and reprogrammed to enable a new Manager code.
Reset the lock SMRC If the Super Master Reset Code has been activated because it was changed before the Manager code was changed, it can be used to reset the lock. After reset, the Manager code defaults to 1-2-3-4-5-6, the user code is deleted, and Super Master Reset Code remains the same. • Press and hold 0 for 3 seconds A second set of
1. Disconnect the safe lock from all power sources. The safe lock should also be disconnected from any Keypad or Multiplexer prior to connecting the Reset Box. 2. Insert batteries into the Reset Box. 3. Connect the Reset Box to the Safe Lock BAT port. 4. The LED will illuminate and then stop when the reset is complete. DO NOT
1. Disconnect the safe lock from all power sources. The safe lock should also be disconnected from any Keypad or Multiplexer prior to connecting the Reset Box. 2. Insert batteries into the Reset Box. 3. Connect the Reset Box to the Safe Lock BAT port. 4. The LED will illuminate and then stop when the reset is complete. DO NOT
