Search results
packet queuing in the radio, Cisco has implemented extensions to the PPPoE protocol that enable the router to control traffic buffering in congestion situations. Implementing flow-control on these router-to-radio sessions also allows the use of fair queuing. The flow control solution utilizes a credit-granting mechanism documented in RFC 5578.
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP 's IP network, and from there to the rest of the Internet.
This chapter provides information about using PPPoE, including theory, supported features and configuration process overview. Topics in this chapter include: PPPoE on page 512. PPPoE Authentication and Authorization on page 515. General Flow on page 515.
Use the Point-to-Point Protocol over Ethernet (PPPoE) encapsulation to connect multiple hosts on an Ethernet LAN to a remote site via a single customer premises equipment (CPE) device. This topic provides an overview of PPPoE and explains how to configure PPPoE, verify the configuration, as well as trace PPPoE operations.
16 paź 2023 · In PPPoE Session stage, the PPPoE server and client both can terminate the PPPoE connection by sending a PADT packet in unicast mode at any time. After sending or receiving a PADT packet, PPP traffic, even normal PPP termination packets, is not allowed to be sent using the session.
Configure your Linux device as follows: 1. Set a host name. The host name must be a user on the Allied Telesis device. To set a default hostname on your linux device, use “hostname <newname>”: [root@linux_client michael]# hostname. linux_client. 2. Check the ppp options file.
5 paź 2022 · This article describes how to troubleshoot PPPoE connection failure when FortiGate is configured as the PPPoE client. Scope. FortiGate. Solution. Verify that the username and password are correctly configured.
