Search results
Using PPPoE, Alcatel-Lucent users can dial from one router to another over an Ethernet network, then establish a point-to-point connection and transport data packets over the connection. In this application subscriber hosts can connect to the router using a PPPoE tunnel.
PADO (control packet downstream) The packet is generated by the control plane as response to the PADI message. The packet is forwarded to the client using the unicast packet directed at the client’s MAC address. The node populates the AC-name tag and service tag.
19 sie 2013 · Packet loss when connecting to my ISP via PPPoE. Ping 8.8.8.8 and ya.ru have lost packets. Numerous sites don't opens. I've changed MTU an flow control of Ethernet interface and nothing helps. When connecting via PPPoE to ISP from two other devices (laptop and home server) everything fine.
Packet loss with many (small) UDP packets¶ If a lot of packet loss is observed with UDP on bce cards, try changing the netisr settings. These can be set as system tunables under System > Advanced , on the System Tunables tab.
Use the Point-to-Point Protocol over Ethernet (PPPoE) encapsulation to connect multiple hosts on an Ethernet LAN to a remote site via a single customer premises equipment (CPE) device. This topic provides an overview of PPPoE and explains how to configure PPPoE, verify the configuration, as well as trace PPPoE operations.
26 sie 2024 · PPPoE (Point-to-Point Protocol over Ethernet) can have disconnect issues for a variety of reasons. This may result in an error message such as 'PPP daemon exited' or similar symptoms indicating a connection loss.
When transmitting packets bound for the Internet, the PPPoE-speaking Ethernet router sends Ethernet frames to the (also PPPoE-speaking) DSL modem. The modem extracts PPP frames from within the received PPPoE frames, and sends the PPP frames onwards to the DSLAM by encapsulating them according to RFC 2364 (PPPoA), thus converting PPPoE into PPPoA.
