Search results
Simply select “Polk DSB1 Sound Bar” from your device list to make the connection. The bar can hold 8 Bluetooth devices in its memory. If enough devices pair after yours, your device could be dropped from the memory list.
If one surround speaker is too loud or the other is too quiet, you can use the remote to adjust the relative balance between the two speakers. To adjust the volume balance of the surround speakers: Press and hold the SURR button on the remote for 2 seconds, then press the + or – to change the relative volume between the two speakers.
1. Check the speaker wire connections, Make sure there tight and clean. For that mater do this for all your connections. 2. Swap the speakers Left for Right and Right for Left. If the problem is in the left channel and it stays there after you swap speakers it's the amp not your speakers.
To troubleshoot if the sound quality of the Polk XT90 speaker is not as expected, you can follow these steps: 1. Check the audio source: Ensure that the audio source (such as a TV, computer, or smartphone) is functioning properly and the volume is set to an appropriate level.
Are you getting any sound at all out of the mid-woofer in the suspect speaker? What are the serial numbers? The mismatched terminal cups are a pretty good indicator that you may have a mismatched pair.
Would be interesting to see how a Monitor 10 would sound with this instead of the existing one. It would roll off the MW drivers at different frequencies which should give an improvement on the combing and lobing issues:
Listen Carefully. Polk Audio loudspeakers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio accepts no liability for hearing loss, bodily injury, or property damage resulting from the misuse of its products.
