Search results
3 lut 2023 · If the computer still fails to connect to the machine, try a different parallel port or computer. If the computer connects but has communication errors, continue troubleshooting by following the steps in the next topic.
1 wrz 2023 · If you have a WiFi dongle on the computer try unplugging and/or disabling it. Try turning off any nearby mobile phones. If you are using wireless or Bluetooth keyboard & mouse, try swapping these for corded ones.
PlasmaCom to PC Conversion. Hey all, New to this forum and new to the CNC world in general... I just purchased an 18 year old plasmaCam 48x48 CNC table and software. Supposenly the main board is fried and needs a replacement, trying to work with PlasmaCam to get a new board, $2000USD.
• Wireless connection (rather than by parallel port). Provides much wider computer compatibly, since wifi hardware is common and inexpensive to add to any PC (including laptops). No more cable between computer and machine to damage, trip over, or cause electrical/grounding problems and communication errors.
PlasmaCAM’s DesignEdge ® software was developed specifically for plasma cutting and is the most important part of the system. This complete Windows-based CAD/CAM program not only creates designs, it also runs the machine (no other software programs are needed).
If you're running a new Hypertherm 65 or 85, it's possible to run a machine torch with a dedicated control cable which, does away with having to splice wires internally as has to happen with the hand torch and, also allows rapid torch changeover from machine to hand cutting.
The PlasmaCAM systems include a video-based instruction manual that helps you swiftly get your plasma cutting up and running quickly. The video manual is an excellent source of technical information - showing how to set up, operate and maintain the machine, and how to use the software.
