Search results
1 wrz 2023 · If you have a WiFi dongle on the computer try unplugging and/or disabling it. Try turning off any nearby mobile phones. If you are using wireless or Bluetooth keyboard & mouse, try swapping these for corded ones.
3 lut 2023 · If the computer still fails to connect to the machine, try a different parallel port or computer. If the computer connects but has communication errors, continue troubleshooting by following the steps in the next topic.
• Wireless connection (rather than by parallel port). Provides much wider computer compatibly, since wifi hardware is common and inexpensive to add to any PC (including laptops). No more cable between computer and machine to damage, trip over, or cause electrical/grounding problems and communication errors.
Update driver. I have done all this but the error is still the same: "Unable to connect to machine. Check power, parallel ports and cables. Turn off controller for 5 seconds (and/or disconnect cable), then try again." The pause light is blinking on the controller and everything looks normal.
The pause light is blinking on the controller and everything looks normal. Can someone help me make sure the Device Manager settings are correct and that the Machine Settings are correct in PlasmaCam software? Thank you for any input or suggestions!
Common Setup Problems and Solutions. PlasmaCAM's technical support receives many, repeating calls about the following issues. Before you call with a problem, please check this list to see ifit is directly addressed: Do not power the machine, computer or plasma cutter from a GFI receptacle.
The PlasmaCAM systems include a video-based instruction manual that helps you swiftly get your plasma cutting up and running quickly. The video manual is an excellent source of technical information - showing how to set up, operate and maintain the machine, and how to use the software.
