Search results
3 lut 2023 · If the computer still fails to connect to the machine, try a different parallel port or computer. If the computer connects but has communication errors, continue troubleshooting by following the steps in the next topic.
PlasmaCAM’s DesignEdge ® software was developed specifically for plasma cutting and is the most important part of the system. This complete Windows-based CAD/CAM program not only creates designs, it also runs the machine (no other software programs are needed).
1 wrz 2023 · If you have a WiFi dongle on the computer try unplugging and/or disabling it. Try turning off any nearby mobile phones. If you are using wireless or Bluetooth keyboard & mouse, try swapping these for corded ones.
• Wireless connection (rather than by parallel port). Provides much wider computer compatibly, since wifi hardware is common and inexpensive to add to any PC (including laptops). No more cable between computer and machine to damage, trip over, or cause electrical/grounding problems and communication errors.
PlasmaCom to PC Conversion. New to this forum and new to the CNC world in general... I just purchased an 18 year old plasmaCam 48x48 CNC table and software. Supposenly the main board is fried and needs a replacement, trying to work with PlasmaCam to get a new board, $2000USD.
The PlasmaCAM systems include a video-based instruction manual that helps you swiftly get your plasma cutting up and running quickly. The video manual is an excellent source of technical information - showing how to set up, operate and maintain the machine, and how to use the software.
30 gru 2017 · Update driver. I have done all this but the error is still the same: "Unable to connect to machine. Check power, parallel ports and cables. Turn off controller for 5 seconds (and/or disconnect cable), then try again." The pause light is blinking on the controller and everything looks normal.
