Search results
Drill and tap from edge of workpiece “A”. 3. Assemble clamp with o-ring below clamp body. 4. Position clamp as shown in diagram and loosely screw to fixture. 5. Insert workpiece and tighten cap screw. 1. Mill a slot for the Pitbull® Clamp using “B” and “C”. 2. Drill and tap from edge of workpiece “A”. 3.
5. Pitbull@ Clamp Instructions Mill a slot for the PitbulP Clamp using "B" and "C.' Drill and tap from edge of workpiece 'X Assemble clamp with O-ring below clamp body. Position clamp as shown in diagram and loosely screw to fixture. Insert workpiece and tighten cap screw.
Cleaning the surface of the machine. Assemble the drill machine based on manual, instruction guide. 1-2. Transportation instruction: Please refer to instruction manual in specification and machine weight to arrange handling manner. Be sure to use capable fork – lifter or hoist to lift of machine.
12-in bench drill press with laser-trac, 1/3 horsepower (continuous duty) 2/3 horsepower (maximum devemoped) 5-speed, step pulley 620 - 3100 r.p.m. drill speed range. Brand: Craftsman | Category: Power Tool | Size: 9.66 MB.
Drill bit burns 1.Incorrect speed. 1.Change speed. 2.Chips not coming out of hole. 2.Retract drill bit frequently to clear chips. 3.Dull drill bit 3.Resharpen drill bit. 4.Feeding too slow 4.Faster the speed. 5.Not lubricated 5.Lubricate drill bit. Drill bit leads off… hole not round 1.Hard grain in wood or lengths of cutting lips and/or ...
This drill press is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a drill press, do not use until proper training and
These drill presses include multiple or variable speeds for drilling holes on cast iron, steel, aluminum, wood, etc. The presses have been designed for indoor use and must be used only in dry conditions.
