Search results
determine the hardness and pH of your water supply. • Test Strips - Follow the instructions on the provided test strips. If the color on your test strip is between two readings, use the higher number. Compare the colors as soon as you remove them from your water. • Hardness Test - The resulting number gives the hardness in grains per gallon
1 lut 2024 · These strips allow you to test the hardness of your water and give you a numerical value that can be compared against the grain rating of your softener. To use hardness test strips, follow the manufacturer’s instructions.
water supplier- For municipal water, call your water department to determine the hardness and pH of your water supply. Test strips - If test strips are provided, follow the instructions on test strips.6 2 PRECAUTIONS PRECAUTIONS GUIDE GETTING MAXIMUM EFFICIENCY FROM THE APPLIANCE To maximize the benefits and
1.2 Measure water hardness before/after appliance: • Open a cold water faucet before/after the appliance and let the water run for a few minutes. • Take a water sample and measure the water hardness; record the values on the Installation Record in the Owner’s Manual. • Close the cold water faucet.
Water Filter can address these water shortcomings. • Model 900-IF (Iron Filter) —Reduces iron, manganese, hydrogen sulfide, and iron bacteria. • Model 900-NF (Acid Neutralizing filter) —Adjusts low pH water to a non-corrosive state. Iron —A common problem found in many water supplies is iron. It is important to know what type of and how
Each WaterBoss® water conditioner and filter includes water test strips and 8' of drain line. 1. Placement: Place your WaterBoss® appliance in desired location. Turn off electricity and water supply to water heater. Make sure inlet/outlet and drain connections meet the applicable local codes.
testing the water The water should be tested periodically (2 times a year minimum) with hardness test strips to ensure that the system is performing accurately.
