Search results
The Painless wire harness is designed to be used in vehicles with a General Motors - keyed steering column, or other steering columns, depending on the kit purchased. All wire is 600 volt, 125 c, TXL.
The installation of your wire harness mainly consists in two parts: • The physical routing and securing of the wire harness, wires, and groups. • The proper connection of the individual circuits.
Performance at (800) 423-9696. The Painless Wire Harness Kit should contain the following items: • The Main Wire Harness, with the Fuse Block wired in and fuses installed, Headlight Harness • Pig Tails: Windshield Wiper, Instrument Panel, 5 Indicator Lamp, Heater Switch, 1 Alternator and 1 Generator.
The Painless Wire Harness Kit should contain the following: Main Wire Harness, with the 2 Fuse Blocks wired in and fuses installed. 2 Bag Kits containing: 1) 1 package of 4” Tie Wraps, 7” Tie Wraps, Umbrella Tie Wraps, a Ballast. Resistor, 3 Firewall Grommets, 1 pass through plate grommet, Turn
2 sie 2005 · The Painless wire harness is designed to be used in vehicles with a General Motors - keyed steering column, or other steering columns, depending on the kit purchased. All wire is 600 volt, 125°c, TXL. Standard automotive wire is GPT, 300 volt, 80°c, with PVC insulation.
wires labeled VSS to a vehicle speed sensor that will provide a two (2) pulse signal to the computer. The Throttle Body the sensor should output a square wave. Painless Wiring offers the correct speed sensor for use with cable drive (mechanical) transmission outputs, p/n 60115
The installation of your wire harness mainly consists in two parts: • The physical routing and securing of the wire harness, wires, and groups. • The proper connection of the individual circuits.
