Search results
The criteria and practices requirements for guardrail systems on scaffolds are contained in 29 CFR part 1926, subpart L. Figure D-11 -- Guard Rail Systems. Depicts two figures showing two types of Guard Rail Systems. The first shows the walking-working surface, posts, and mid rail for guard system.
Where workers on a construction site are exposed to vertical drops of 6 feet or more, OSHA requires that employers provide fall protection in one of three ways before work begins: Placing guardrails around the hazard area. Deploying safety nets. Providing personal fall arrest systems for each employee.
Guardrail systems. Guardrail systems and their use shall comply with the following provisions: 1926.502 (b) (1) Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.
The employer must ensure guardrail systems meet the following requirements: ( 1 ) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
The employer must ensure: (i) Each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.
20 kwi 2022 · Are you curious about OSHA handrail requirements or what OSHA railing height is appropriate for your facility? First of all, here are some applicable requirements for guardrails and safety railings included in OSHA’s Walking-Working Surfaces standard for general industry to help prevent fall hazard, 29 CFR 1910.29:
What Are OSHA’s Guardrail Requirements? Fall protection in general—and the use of railings and guardrail systems in particular—is covered under OSHA’s walking and working surfaces rule, 1910 Subpart D, which was updated in 2017.
