Search results
Guardrail systems. The employer must ensure guardrail systems meet the following requirements: 1910.29 (b) (1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
Where workers on a construction site are exposed to vertical drops of 6 feet or more, OSHA requires that employers provide fall protection in one of three ways before work begins: Placing guardrails around the hazard area. Deploying safety nets.
Guardrail systems. Guardrail systems and their use shall comply with the following provisions: 1926.502 (b) (1) Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.
Key Areas to Inspect for Fall Protection: Personal Fall Arrest Systems (PFAS): Check harnesses, lanyards, and connectors for wear or damage. Guardrails: Inspect guardrails for stability and secure attachment. Anchorage Points: Verify the strength and suitability of anchorage points.
(b) Guardrail systems. The employer must ensure guardrail systems meet the following requirements: ( 1 ) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
View the PDF for 29 CFR Part 1910; These links go to the official, published CFR, which is updated annually. As a result, it may not include the most recent changes applied to the CFR. Learn more.
A variety of provisions in the 2017 final rule cover when guardrails and railings should be used and how they should be constructed. For instance, OSHA standard 29 CFR 1910.23 covers requirements for ladders and includes information
