Search results
16 kwi 2012 · The EZ* is frequently upgraded by replacing the stock brushed motor with a high-Kv (@2000) brushless motor spinning around a 6x4. You should be able to locate many upgrade threads with the search function.
- Battery for Easy Star
My first plane, the Multiplex Easy Star RTF, will be...
- Battery for Easy Star
23 sty 2010 · My first plane, the Multiplex Easy Star RTF, will be arriving in a couple weeks, so I want to get a nice battery and charger to enable me to have long flights. Here are my first choices: $29.99 - Turnigy Accucel-6 50W 5A Balancer/Charger. $19.43 - Turnigy 3000mAh 2S 30C Lipo Pack.
11 cze 2006 · Easy Star Battery Upgrade. I fly a Multiplex Easy Star. I'm using a 7 cell 1200 mAh NiMh now. Considering a 2 cell LiPo to increase run time. But I discovered a potential issue. My 7 cell pulls 10 amps at full throttle. A 2 cell LiPo pulls 7.5 amps and the motor clearly does not turn as fast.
With the recommended 3s 2200mAh ROXXY battery, up to 40 minutes of flight time can be achieved without thermals. Due to the rearward, protected motor, it also tolerates rough landings. It draws attention to itself with its striking design.
The upgrade components to my Easy Star included a brushless motor and corresponding speed controller. The motor I chose was the HXT 2835 (380S) 2700kv Brushless Inrunner and the hexTronik PRO 36A BESC, both from Hobby City.
With the recommended 3s 2200mAh ROXXY battery, up to 40 minutes of flight time can be achieved without thermals. Due to the rearward, protected motor, it also tolerates rough landings. It draws attention to itself with its striking design.
28 mar 2007 · Since the Li-Po you're looking at is 7.4, it will perform similar to the underpowered 6 cell NiMh only. Another thing to consider is that you'll need a battery that weighs around 5.3 ounces to attain a good center of gravity on the stock Easy Star.
