Search results
Step 3 Trim the rear bumper cover using the trim diagram to the right as reference. Step 4 Raise the trailer hitch into position, feeding the fishwires through the proper mounting holes in the hitch. Remove the fishwires and loosely secure the hitch with 1/2" serrated-flange nuts (#2). Torque 1/2" hardware to 110 ft-lbs.
3 kwi 2022 · Attached the DIY instructions for those who are in need of installing towing 4-pin wiring harness.
All models: Raise the trailer hitch into position by sliding the passenger side of the hitch over the exhaust first. On both sides of the vehicle, align the three holes in the hitch with the three weld nuts in the frame rail. Loosely install three hex bolts (#1) and three conical washers (#2) into the hitch holes and weld nuts on both sides.
I just recently finished installing an EcoHitch Trailer Hitch on my Tesla Model 3. I wanted to create a comprehensive write up about which hitch I chose, the installation of the hitch and wiring as well as the options I had for installing the trailer light wiring.
Step 3 Raise the trailer hitch into position by sliding the passenger side-plate over the exhaust first. Secure the hitch into position using M12-1.25 x 35mm bolts (#1) and 1/2" conical-toothed washers (#2).
Puck-Mounted Attachment Companion ® OEM. Fits Your Manufacturer’s Four-Puck Hitch Platform
the cover into the opening at the end of the trailer hitch. When you reinstall the ball mount, store the cover in the cargo area. Install the ball mount into the trailer hitch using a hitch pin clip and hitch pin.
