Search results
MOCAL Oil Cooling Diaphragm Pump. Pump has integral cooling fan, 12 or 24volt motor. Ports are 3/8NPTF and may be rotated in 90° increments to simplify plumbing. The pump body is made of lightweight nylon, care must be taken when tightening tapered adapters not to over tighten and crack housing.
This mid size pump is ideal for transmission / differential cooling or for turbo oiling applications. The oil pump is constructed using a brass body with bronze gears so it is capable of pumping oils of various viscosities. The motor body is sealed and is waterproof to IP-65.
14 paź 2024 · Mocal oil pump EOP2 is a self priming compact gear pump which has been designed primarily for gearbox or diffential oil pumping and has been used in some turbo oiling applications. Please note, the oil must be at 70°C or above before the pump can be used. Recommended to use a 240 micron filter. Port thread: 3/8BSP.
Mocal oil pump EOP2 is a self priming compact gear pump which has been designed primarily for gearbox or diffential oil pumping and has been used in some turbo oiling applications. The brass pump body features bronze gears which can cope with most oil viscosities.
Mocal, Thames House, Ashford Road, Middlesex, TW15 1XB | Tel: +44 208 568 1172 | Fax: 01784 248 455. © Mocal 2017 | Web design by Think Automotive. Distributors of Mocal products in North America.
Mocal 12v oil pump. Suitable for gearbox cooling systems, other transmission applications, engine pre-start up lubrication. Features a lightweight nylon body construction with built in cooling fan and 3/8 NPT female ports. The unit can produce upto 50psi and has a flow rate of 2 gallons per minute. Maximum recommended working temperature of 130°C.
Mocal Electric Oil Pump - EOP2 - Mocal oil cooling pump designed for pumping oil around gearboxes and differentials. A mid sized oil pump from Mocal which is compact for low flow oil pumping. Phone, buy online or visit us at Castle Combe Circuit.
