Search results
6 sty 2023 · Making Your DIY CNC Plasma Table. We will provide a step-by-step walkthrough for how to build your very own DIY CNC plasma table, including a list of required tools and equipment, as well as a guide.
25 gru 2023 · Choose a suitable plasma cutter and integrate it into the system, along with a CNC controller and stepper motors to drive the movements. Install limit switches for safety and homing purposes, and set up a water table or downdraft system for fume and debris management.
Read this chapter on safety and the sections of vendor components manuals on safety before beginning to operate the Piranha Plasma Cutting Table. Do not become complacent about safety or completely dependent on safety devices.
The cutting current and speed, as well as the diameter of the orifice in the plasma torch nozzle determine the width of the kerf. Typically, the amount of offset will range from 0.040” (1.0 mm) to 0.080” (2.0 mm) when cutting mild steel. Refer to the plasma cutting system manual for recommended kerf offsets.
This plasma table has been designed to work with whatever plasma torch you have whether hand-held or a full blown CNC Torch. The mounting plate has been designed to be adaptable as possible.
After designing and building this CNC Plasma table I wanted to share the model. Detailed building instructions with drawings, dxf-files and bill of materials included. There is also pictures from the build.
6 gru 2022 · If you purchased a CNC - CrossFire Compatible Razorweld Plasma cutter (Razorcut 45 CNC or Vipercut 30 CNC) from Langmuir Systems, your plasma cutter is plug and play with your CrossFire CNC system. Use the provided Torch Firing Cable to plug directly into the CNC Port on your Razorweld Cutter.
