Search results
First choice for machining steel, cast iron, and short chipping materials. Suitable for severe cutting conditions. First choice for stainless steel. Suitable for deep drilling and operations where low power consumption is required.
All Speed Conditions are for stable conditions. For unstable conditions, suggest to reduce starting Speeds by 10%. For interupted cuts, reduce by 20% For 4xD, it is highly recommended to start with Feed and Speed values reduced by 10% less than above data
Speed and Feed Recommendations NOTE: The speeds and feeds shown are suggested starting points only and may be increased or decreased depending on actual material and machining conditions. Start conservatively and increase speed and feed until drilling cycle is optimized. WORKPIECE MATERIAL BRINELL HARDNESS BHN SURFACE SPEED SFM FEED PER ...
Speeds & feeds are starting recommendations only. Factors such as machine, fixture and tooling rigidity, horsepower available, coolant application and others will affect the performance significantly.
1) Select your material in the ISO colored chart with respect to material description. 2) Start with a middle/average value for cutting speed, V c (m/min) and feed, f n (mm/rev). Adjust the cutting speed and/or feed based on your cutting conditions. METRIC 1.0 2.0 METRIC 3.0 - - 5.0 6.0 - - 8.0 FRACTIONAL - - FRACTIONAL - 1/8 3/16 - - 1/4 5/16 -
Start with conservative speeds and feeds while analyizing the rigidity of the process. Then cautiously progress incrementally to achieve optimum performance. 800.248.8315 | fullertontool.com.
Drilling speeds and feeds are important factors to consider when drilling metal. Proper speeds and feeds can maximize tool life, surface finish, and hole accuracy. This document provides general guidelines for drilling speeds and feeds in various materials like steel, aluminum, and plastics.
