Search results
Network Address Server Settings (DHCP) DHCP Server DHCP is enabled by factory default. If you already have a DHCP server on your network, or you do not want a DHCP server, then select Disable (no other DHCP features will be available).
If you run more than one DHCP server on your network, you will experience network errors, such as conflicting IP addresses. To disable DHCP on the Router, see the DHCP section in “Chapter 6: The Router’s Web-based Utility.”. This User Guide covers the steps for setting up a network with the Router (see Figure 1-1).
You need to set the DNS server on the computer to the router's address (typically 192.168.1.1). The caching DNS server on the router will redirect the query to the currently configured ISP's routers. The IP should be chosen from outside the DHCP range (on this particular model, 192.168.1.2 - 192.168.1.
DHCP Server: Allows the router to manage your IP addresses. Starting IP Address: The address you would like to start with. Maximum number of DHCP Users: You may limit the number of addresses your router hands out. More... Time Setting: Choose the time zone you are in. The router can also adjust automatically for daylight savings time.
Page 9 Chapter 3 Internet Connection Type > Automatic Configuration - DHCP Static IP If you are required to use a permanent IP address to connect to the Internet, select Static IP. Internet Connection Type > Static IP Internet IP Address This is the Router’s IP address, when seen from the Internet.
It specifies Router’s default IP address is 192.168.1.1, the Starting IP the largest packet size permitted for Internet transmission. Address must be 192.168.1.2 or greater, but smaller than Select Manual if you want to manually enter the largest 192.168.1.253.
Wireless Setup is performed through the Wireless tab. Router IP This presents both the Router’s IP Address and Subnet Mask as seen by your network. Router IP Address Network Address Server Settings (DHCP) The settings allow you to configure the Router’s Dynamic... Page 12: Setup > Mac Address Clone
