Search results
In this article, you will learn how to set up the Linksys Dual-Band WiFi Router as a Wireless Bridge and use it to act like a wireless adapter and add wireless networking capability to any wired (ethernet) device.
- Linksys WET610N/WES610N Dual-Band N Entertainment Bridge
Make sure the wireless-enabled device is on the same...
- Linksys WET610N/WES610N Dual-Band N Entertainment Bridge
For ethernet and wireless adapters, you need to download the driver. For devices such as routers, gateways, and network access storage, you need to download the firmware.
Select Bridge Mode to use the Linksys Dual-Band WiFi Router as a wireless access point instead of a router. Make sure that you connect this router’s internet port to the ethernet or LAN port on the router that is connected to your modem.
Zobacz Routery WiFi i Access Pointy Linksys w Komunikacja i łączność - Najwięcej ofert w jednym miejscu. Radość zakupów i 100% bezpieczeństwa dla każdej transakcji. Kup Teraz!
Thank you for choosing the Linksys by Cisco Wireless-N Ethernet Bridge with Dual-Band. The Bridge can connect any wired, Ethernet device to your wireless network. The Bridge is based on dual-band Wireless-N, so it is compatible with any Wireless-N, -G, -A, or -B router or access point. For first-time installation, run the Setup Wizard on the
Make sure the wireless-enabled device is on the same wireless network as the computer or other wired, Ethernet device connected to the bridge. Make sure that the same Network Name (SSID) is used for all devices on the wireless network. Make sure all devices are on the same IP network, using compatible IP addresses.
• Status - Displays the Bridge’s current settings. • Help - Provides explanations of various configuration settings and links to online technical support resources. You can also upgrade the Bridge’s firmware using the Help screen. Setup Tab The Setup screen lets you configure the wired and wireless network settings for the Bridge. Setup
