Search results
2.1 Channel Soundbar System Adjust the volume on your soundbar or the source audio device to a comfortable level. WARNING: Continuous use of high volume sound may permanently damage your hearing. Press the (Power) button again to turn off your soundbar.
To reset the volume control back to the soundbar or audio receiver using the Insignia NS-RMTSAM21 remote controller, follow these steps: 1. Hold down the green B and yellow C buttons until the LED blinks twice. 2. Press 977 on the remote. 3. The LED will blink four times, indicating that the remote is now reset.
Point your new remote towards your sound bar or audio devices and hold down the digit button for your brand (see table to the left). As soon as your sound bar or audio device mutes the volume, release the digit button.
NS-SB216 Using the remote control 1 Remove the plastic tab from the battery compartment before using the remote control for the first time. 2 Point the remote control directly at the IR sensor on the front of the soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
Controlling the volume on your sound bar or audio receiver If you have your TV connected to a sound bar or audio receiver, you can set up your Insignia universal remote control to control the volume and mute of those devices.
1 Turn your TV and sound bar or audio device on, and make sure that there is something playing that you can hear. 2 On your new remote hold down volume + and - buttons together until the LED blinks twice.
NS-HTSB22 Replace Soundbar Remote Control Compatible with Insignia Sound Bar System NS-HTSB22 NS-SBAR21F20
