Search results
In particular, all modern hydrocarbon rotary rigs contain five main systems. These systems are: the Power System; the Hoisting System; the Rotary System; the Circulation System; the Well Control System (Blowout Prevention System) These systems are shown in Figure 9.01. In addition, Figure 9.02 shows a more detailed schematic diagram of a rotary ...
Hydrocarbon Production. Two basic kinds of oil & gas production. Conventional. Porous formations. Primary method for over 150 years.
26 kwi 2017 · This chapter discusses the equipment and design criteria used in common water-treatment systems for disposal or injection. In addition to the removal of dispersed or dissolved hydrocarbons and solids, the water-treatment engineer may be concerned with chemical treatment, material selection, and solids disposal, which are also covered.
1 lip 2022 · Currently, produced water is mainly treated using conventional trains that contain adsorbates, membrane filters, phase separators and cyclones. This paper reviewed the detailed characteristics of oilfield-produced water and the assessment of multiple technologies at primary, secondary, and tertiary treatments stages.
A rotary drilling rig, whether on land or offshore, can be thought of as a factory designed to produce only one product—an oilwell, or hole, as it is called in the business.
13 lis 2023 · This article discusses techniques for the removal of free and dissolved hydrocarbons. See Removing solids from water for information on solids removal. Contents. 1 Separating free hydrocarbons from water. 1.1 Gravity separation. 1.2 Dispersion. 1.3 Coalescence. 2 Gravity separation devices. 2.1 Skim tanks and vessels.
4 maj 2020 · Modern rigs use a topdrive to replace the kelly, kelly bushings, and rotary table. Drillstring rotation is achieved through hydraulic or electric motors. One type of topdrive is shown in Fig. 2. Topdrives are suspended from the hook and can travel up and down the derrick.
