Search results
To use the IP multicast routing feature on the switch, the switch or active switch must be running the IP Services feature set. You must enable IP multicast routing and configure the PIM version and PIM mode on the switch .
You can configure a stub router (switch) with the igmp helper help-address interface configuration command to enable the switch to send reports to the next-hop interface. Hosts that are not directly connected to a downstream router can then join a multicast group sourced from an upstream network.
13 kwi 2012 · I have stack of 2 switches 3750s for core networking on the site and a stack of 4 2960-s for distribution. My problem is that my DHCP which is Win2008 Server is not working on the vlan interfaces. It does work on the native vlan 1 which is 192.168.186.1/24. But i have 3 other VLANs(2,3,4:187.1,188.1,189.1).
11 sie 2021 · 1. To change your router's settings you'll need to be able to talk to it, and to do that you need to know its IP address. Many routers use 192.168.1.1 as their default IP address, but yours...
There are two types of routers: Routers with default configuration. Routers without default configuration. In cases where no specific configuration is present, the IP address 192.168.88.1/24 is assigned to ether1, combo1, sfp1, or MGMT/BOOT.
The Setup section provides step-by-step guidance on installing and initially configuring your device. Login and Password Find answers to your questions regarding your device's admin settings, including password recovery, secured device access, and user credential manage…
Static routes are configured manually by typing the global configuration mode command ip route DESTINATION_NETWORK SUBNET_MASK NEXT_HOP_IP_ADDRESS. This type of configuration is usually used in smaller networks because of scalability reasons (you have to configure each route on each router).
