Search results
The following are the prerequisites for configuring IP multicast routing: To use the IP multicast routing feature on the switch, the switch or active switch must be running the IP Services feature set. You must enable IP multicast routing and configure the PIM version and PIM mode on the switch.
You can configure a stub router (switch) with the igmp helper help-address interface configuration command to enable the switch to send reports to the next-hop interface. Hosts that are not directly connected to a downstream router can then join a multicast group sourced from an upstream network.
13 kwi 2012 · I have stack of 2 switches 3750s for core networking on the site and a stack of 4 2960-s for distribution. My problem is that my DHCP which is Win2008 Server is not working on the vlan interfaces. It does work on the native vlan 1 which is 192.168.186.1/24.
Login and Password. Find answers to your questions regarding your device's admin settings, including password recovery, secured device access, and user credential manage….
To configure this, do the following: Switch to Expert View by clicking the bi-directional icon on the top right of the Primary AP UI. Navigate to Wireless Settings > Access Points Groups > Add New Group. In the General tab, provide an AP Group Name and a description for your reference.
2 maj 2011 · You can configure static route on for your /32 address: ip route 10.10.10.10 255.255.255.255 Null0
Static routes are configured manually by typing the global configuration mode command ip route DESTINATION_NETWORK SUBNET_MASK NEXT_HOP_IP_ADDRESS. This type of configuration is usually used in smaller networks because of scalability reasons (you have to configure each route on each router).
