Search results
7 lip 2023 · How to mix gas and oil for a 2-cycle Homelite string trimmer: Use the chart below to determine how much fuel mix to prepare. Remove the cap from an approved gas can. Add unleaded fuel (minimum 87-octane rating & maximum 10% ethanol content) to a gas can. Refer to the chart below for the ounces of oil required. Add the 2-cycle oil to the gas can.
26 lut 2022 · First off, this would be my first post on this site so hello, And secondly, I've recently started collecting antique chainsaws. I know back in the day fuel mixes were regular motor oil and gas so the ratios were like 16:1 or 32:1.
30 lip 2008 · I have an old xl12 that i'm not sure of the fuel mixture. I run 40:1 for other saws i've used but someone told me it wouldn't be the same. anyone know what the mixture might be?
9 kwi 2018 · What is the Fuel/Oil mixture for my (Johnson or Evinrude) motor? 1958 and prior used 20:1; 1959 thru 1969 used 24:1; 1964 and newer use 50:1; New engine break-in (not direct injection) requires 25:1
This product is powered by a 2-cycle engine and requires premixing gasoline and 2-cycle oil. The mixture should be at a 50:1 ratio. NOTE: We recommend you use ONLY Homelite lubricant in your product. To mix the fuel: Use a clean container that is approved for use with gasoline.
Most outboard motors require a 50:1 ratio. How to Create the Oil Mix. Pour the correct amount of 2-stroke oil into a clean gas can. Add the correct amount of gasoline. Stir or shake the container to mix the oil and gas. Use the mixture within 30 days or add fuel stabilizer to extend the shelf life. 2-Stroke Oil Mix Calculator
Two-cycle string trimmers by Homelite require a 50:1 ratio of gas to oil. To achieve this result, blend 50 parts gasoline with 1 part vegetable oil. For a visual guide to how many gallons of oil you’ll need to combine, see the table below.
