Search results
17 cze 2020 · I bought a new MFJ-936B loop antenna tuner from them and tried using it with a Kenwood TS-820 on phone with a 3/8" copper pipe loop element about 5 feet in diameter. I don't remember which band I was working but the loop was appropriate for the band, as per the manual.
QRP Manual Antenna Tuner Diy Kit V2. Welcome to www.lxqqfy.com to get the latest information. The kit can be through the T network resonant antenna, to make the radio work normally. Change SWR, corrections due to external reasons not tuned antenna.
Works great at 100 watt, easy to tune, compact Time Owned: 0 to 3 months. This little tuner fits in my go kit and works great. To minimize stress on the tuner, I don't tune with the radio. I connect an antenna analyzer to the tuner and adjust for minimum SWR. Only then I connect it to the radio.
This homebrewed antenna tuning unit also incorporates a 50-ohm QRP dummy load, power meter (1 or 10 Watts full scale), and SWR meter. Switched inductor L match tuner. A 10 to 80 meters band qrp antenna tuner by KC8AON, based on Steve Weber, KD1JV "ALT or Altoids L Tuner". Short Whip Antenna Tuner.
My homebrew antenna tuner is capable of handling 100 watts if I need to use it with my IC-7200 XCVR. I will publish the results of my experimental tuner on this page as I progress through variations of it.
29 cze 2021 · There are tuned single-band whip antennas, with BNC connectors, available from MFJ and probably other sources. I have gotten a 20 meter one and also a set of 8 loading and coils and one telescoping whip, all through ebay. The antenna will mount right on the radio, and with the built-in mic and speaker, you have an HF walkie-talkie.
16 cze 2022 · To use the ATU-10 with the interface cable, there is the setup procedure. Hook up all of the cables, including the interface cable to the IC-705. Now turn the ATU-10 on. Once booted, turn on the IC-705. Go into the, “Function” screen and tap the, “tuner” icon. You are ready to go.
