Search results
4 cze 2024 · On the 3.5" TSLCD screen, it shows line pressure is 0 psi. If there isn't a pressure sensor in the transmission, that would explain it. Thank you.
- Can oil pressure be mapped through the Sniper? - Holley Performance ...
Yes, the 4500 Stealth has the 3 extra input lines, so you...
- Can oil pressure be mapped through the Sniper? - Holley Performance ...
8 cze 2021 · You'll feed the transducer to the ECU through the 0 to 5 volt reference, (read the instructions for the Sniper) then connect the module to the ECU and to the gauge/gauges. What ECU do you have? The base model Snipers will not support 0 to 5 volt references. That gauge won't work with a Sniper.
23 gru 2016 · Try unhooking the O2 sensor and see what it does. You definitely don't want to run it too long like that. It will pick up all those bad learns. or at least disable learning while it's running all goofy. But if the system thinks your at 35AFR, then the injectors will be pushing 100% of duty cycle to try bring it down.
20 wrz 2022 · My O2 sensor issues were determined to be the sensor tip being to deep into the exhaust pipe. This allowed moisture and cold cranking fuel to contaminate (soak) heating element causing premature failure during cranking and idling.
There are two terminated connectors in the harness, the TPS (Throttle Position Sensor) and MAP (Manifold Air Pressure) sensor. One or both are required depending on the calibration. All base calibrations are intended for use with a TPS input (TPS is REQUIRED for proper operation), and no MAP sensor input.
Sniper EFI Software/Installer v2 Build:12 - Windows Vista,7,8,10 Compatible. New Sniper-2 Bundles: EFI Conversion Is More Affordable Than Ever! Get help from other Gear Heads!
13 mar 2019 · Yes, the 4500 Stealth has the 3 extra input lines, so you can hook up a fuel pressure sensor and an oil pressure sensor. Those sensors will not show up on your handheld, but they will show up on a Digital Dash.
