Search results
Ham Radio HF/VHF Antenna Lengths Chart. Here is a handy chart for determing 1/4 wave verticals, 1/2 wave dipoles, and full wave loop lengths. All antenna lengths in the information below are in feet and are the results based on the standard formula of 468 / FMhz = total length in feet.
5 cze 2021 · Antenna Calculator for HF Antennas. Here is a simple antenna calculator for two popular forms of ham radio HF wire antennas: the horizontal dipole and the inverted "V". (Updated June 5, 2021)
In practice, to optimize NVIS (Near Vertical Incident Skywave) performance, deploy the antenna horizontally at a height of 1/8 wavelength on any given band for a 0–650 km (0–400 miles) coverage area. Where DX will occur into the greyline from 7.0-19MHz during evening or daytime deployments.
19 sty 2017 · I want to use an end-fed wire antenna, but what would be the best length of wire for the 20m and 40m bands? Is there a way to work this out? This is assuming a tuner will be used.
The Single Wire End Fed Antenna is probably the simplest antenna to use. But when you start looking around, you find that no one can agree on what length to use. Some say any length will work, some stress odd multiples of 1/4 wavelength, while others lean toward even multiples of 1/2 wavelengths. Some say design for the lowest frequency ...
The random wire antenna is probably one of the least expensive, easiest and cheapest HF antennas to use if you have a tuner and you want to get the "most" out of a length of "random" wire without having to pull out that calculator, doing the math, getting the center insulator built or bought, running the feedline, and all the rest that goes ...
Let’s consider an example: a quarter wave whip antenna on a VHF or UHF handheld radio. This is a common application of an end-fed antenna (although they are often a helical wound “Rubber Ducky” instead of a straight quarter wave, but the same principles apply).
